Installation and Administration

Configuring PostgreSQL

Updated: October 16, 2020

Nuxeo supports the following PostgreSQL versions:

9.3 9.4

We always recommend that you use the latest stable version, which is PostgreSQL 9.3 at the time of this writing.

The database needs to be configured to work properly with Nuxeo. Some settings must be changed in order for Nuxeo to work. Other settings should be changed in order for Nuxeo to have good performance.

This FAQ will give you some hints to configure your database, but please refer to your DBA or the PostgreSQL documentation for more information (http://wiki.postgresql.org/wiki/Tuning_Your_PostgreSQL_Server).

Most settings have to be changed in the postgresql.conf file. Some SQL commands may have to be executed directly at the PostgreSQL console (psql).

Mandatory Changes

Two-Phase Commit

You shouldn't need to change this starting with Nuxeo 5.8 because two-phase commit isn't used in basic configurations. However, if you've disabled single datasource (nuxeo.db.singleDataSource=) to use XA (see the JDBC Datasource Configuration documentation for more on this), you will need to update the default   by default and needs to have the max_prepared_transactions. You can use the same value as max_connections.

max_prepared_transactions = 100

Implicit Casts

Jena (used for relations and comments) and jBPM (used for workflows) assume some implicit value casting in the SQL they generate. However since PostgreSQL 8.3 the database is much stricter than PostgreSQL 8.2 with respect to value casting.

To make Nuxeo work with PostgreSQL >= 8.3, you must therefore execute the following commands in your PostgreSQL console when connected to the template1 database, so that any database created afterward will come with the required CASTs (if your database is already created, execute the commands in your database as well):

CREATE FUNCTION pg_catalog.text(integer) RETURNS text STRICT IMMUTABLE LANGUAGE SQL AS 'SELECT textin(int4out($1));';
CREATE CAST (integer AS text) WITH FUNCTION pg_catalog.text(integer) AS IMPLICIT;
COMMENT ON FUNCTION pg_catalog.text(integer) IS 'convert integer to text';

CREATE FUNCTION pg_catalog.text(bigint) RETURNS text STRICT IMMUTABLE LANGUAGE SQL AS 'SELECT textin(int8out($1));';
CREATE CAST (bigint AS text) WITH FUNCTION pg_catalog.text(bigint) AS IMPLICIT;
COMMENT ON FUNCTION pg_catalog.text(bigint) IS 'convert bigint to text';

This change is mandatory for PostgreSQL >= 8.3 since casts have been simplified. If you don't change this option you will have operator does not exist exceptions.

Possible errors if you don't update the casts as described above are:

org.postgresql.util.PSQLException: ERROR: operator does not exist: integer = character varying

org.postgresql.util.PSQLException: ERROR: operator does not exist: bigint = character varying

com.hp.hpl.jena.db.RDFRDBException: Exception while checking db format - com.hp.hpl.jena.db.RDFRDBException: Internal SQL error in driver - org.postgresql.util.PSQLException: ERROR: current transaction is aborted, commands ignored until end of transaction block

com.hp.hpl.jena.db.RDFRDBException: Internal SQL error in driver - org.postgresql.util.PSQLException: ERROR: current transaction is aborted, commands ignored until end of transaction block

For further details, please see this url. You might also be interested in this migration helper.

Language plpgsql (PostgreSQL < 9.0)

If not already done, if you have PostgreSQL < 9.0 you must enable the plpgsql language:

CREATE LANGUAGE 'plpgsql';

Execute this on the template1 database, so that any database created afterward will get the required language. If your database is already created, execute the command in your database as well.

If you get the following error then it just means that the language is already created (which is the case since PostgreSQL 9.0) and there is nothing further to do:

ERROR:  language "plpgsql" already exists

Create the Role and Database for Nuxeo

For instance (please change the password and the nuxeo.conf file of your instance accordingly):

$ createuser -U postgres -W -P nuxeo
$ createdb -U postgres -W -O nuxeo -E UTF8 nuxeo

Or from the psql command prompt:

CREATE ROLE nuxeo WITH PASSWORD 'nuxeo' LOGIN;
CREATE DATABASE nuxeo ENCODING 'UTF8' OWNER nuxeo;

Note that using the UTF8 encoding for your database is important.

Performance Tuning

Shared Buffers and System Cache

One of the most important thing for PostgreSQL is to have lots of shared buffers along with free memory that can be used by the system cache.

Refer to the section "Adapt your configuration to your hardware" to get the correct value.

If you plan to use 1 GB of shared buffers, update the following property in your postgresql.conf file:

shared_buffers = 1GB

If you use PostgreSQL < 9.3 the shared memory must be available on the system side using sysctl, you need to enable a little bit more at the OS level, for instance try 1 GB + 128 MB:

sysctl kernel.shmmax=1207959552

Then restart the PostgreSQL. If there is no enough shared memory you will have an explicit error message and you should try with a bigger kernel.shmmax value.

Once PostgreSQL is started the retained shmmax value, should be registered in the /etc/sysctl.conf file by adding the following line.

kernel.shmmax = <SHMMAX_VALUE>

PostgreSQL needs to know how much memory the system will use for disk caching. This is used as a hint when executing queries, this memory is not allocated by PostgreSQL.

To set effective_cache_size value, you need to run your application once and check how much memory is used by system cache. This can be done using the free command and using the free value for -/+ buffers/cache:

effective_cache_size = 1536MB

Memory for Workers

Increasing the work_mem parameter allows PostgreSQL to do larger in-memory sorts which is much faster than disk sorts. Have in mind that work_mem size will be taken by each connection (a pool of 20 connections will take up to 20 * work_mem).

work_mem = 12MB

Increasing the maintenance_work_mem will speed up the vacuum procedure.

maintenance_work_mem = 512MB

Buffering Writes

The default wal_buffers can be increase to improve write access time. Increasing the checkpoint segments and completion target helps to spread out the writes.

wal_buffers = 16MB
checkpoint_segments = 32
checkpoint_completion_target=0.8

Index vs Table Scan

The random_page_cost parameter influences this query planner's choice. The value to use depends on your disk IO, here are some advices:

# random_page_cost = 4 # Slow disk AWS EBS
# random_page_cost = 2 # Recent HD
# random_page_cost = 1 # SSD

Updating the Planner Statistics

PostgreSQL computes statistics on table content in order to plan for the best performance when executing queries with joins and complex filters. The default configuration in PostgreSQL <= 8.3 is default_statistics_target set to the value 10 which can lead to not accurate enough estimates. In 8.4 this value is now set to 100 by default. We recommend a higher value like 500:

default_statistics_target = 500

If the database is already populated you need to execute ANALYZE to update the statistics.

Vacuuming

The autovacuum is enabled by default since PostgreSQL 8.3.

Exceptionally, a full vacuum can be done at downtime to recover disk space, it should be followed with a reindexdb command.

Monitoring

We recommend the following setting to have a meaningful log in production

log_line_prefix = '%t [%p]: [%l-1] user=%u,db=%d '
log_min_duration_statement = 400
log_checkpoints=on
log_lock_waits=on
log_temp_files=0
log_autovacuum_min_duration=0
log_statement = ddl
track_functions=pl

Also to have an effective monitoring you should install the following extensions: pg_stat_statements, pg_buffercache

  1. Install postgresql-contrib package.

    sudo apt-get install postgresql-contrib
    
  2. Login to you database as postgres user and create the extensions (require PostgreSQL >= 9.1).

    sudo su postgres -c'psql -U postgres -d nuxeo -c"CREATE EXTENSION pg_buffercache;"'
    sudo su postgres -c'psql -U postgres -d nuxeo -c"CREATE EXTENSION pg_stat_statements;"'
    
  3. Update the configuration.
    shared_preload_libraries = 'pg_stat_statements, auto_explain'
    # custom_variable_classes = 'pg_stat_statements, auto_explain' # uncomment if you are on PostgreSQL 9.1
    pg_stat_statements.max = 10000
    pg_stat_statements.track = top
    auto_explain.log_min_duration = -1
    auto_explain.log_analyze = 'false'
    
  4. Restart the database.

    sudo /etc/init.d/postgres restart
    

See the PostgreSQL section of the Monitoring and Maintenance page.

Adapt Your Configuration to Your Hardware

Here are some values that can be used as a starting point for a dedicated server depending on the amount of memory.

Amount of RAM4 GB8 GB16 GB32 GB
shared_buffers1GB2GB4GB8GB
effective_cache_size1536MB4GB8GB16GB
work_mem12MB12MB16MB20MB
maintenance_work_mem512MB1GB1GB1GB
max_connections63103153203

Specific Configuration

If you want accent-insensitive full-text search, you'll need to install the unaccent contribution, create a new text search configuration, and specify its use in Nuxeo.

Unaccent is described here http://www.postgresql.org/docs/9.0/static/unaccent.html.

Install it by running unaccent.sql script. For Ubuntu users, this file is located at /usr/share/postgresql/9.0/contrib/unaccent.sql.

Connect to your database and run the following instructions:

CREATE TEXT SEARCH CONFIGURATION fr ( COPY = french );
ALTER TEXT SEARCH CONFIGURATION fr ALTER MAPPING FOR asciihword, asciiword, hword_asciipart, hword, hword_part, word WITH unaccent, french_stem;

Then replace in your default-repository-config.xml file the french analyzer by the one you just defined (fr in this example).

Mass Import Specific Tuning

When doing mass import you can disable the full-text trigger and full-text index. They must be dropped after a successful login on a running Nuxeo DM because DDL SQL commands are executed on the first access.

ALTER TABLE fulltext DISABLE TRIGGER nx_trig_ft_update;
DROP INDEX IF EXISTS fulltext_fulltext_idx;
DROP INDEX IF EXISTS fulltext_fulltext_description_idx;
DROP INDEX IF EXISTS fulltext_fulltext_title_idx;

After the import you can update the full-text column like this:

ALTER TABLE fulltext ENABLE TRIGGER nx_trig_ft_update;
-- Let the trigger update the fulltext column
UPDATE fulltext SET fulltext = ''::TSVECTOR WHERE length(fulltext) is NULL;
-- For Nuxeo up to 5.4
CREATE INDEX fulltext_fulltext_idx ON fulltext USING gin (fulltext);
-- For Nuxeo >= 5.5
CREATE INDEX fulltext_fulltext_title_idx ON fulltext USING gin (nx_to_tsvector(fulltext_title::character varying));
CREATE INDEX fulltext_fulltext_description_idx ON fulltext USING gin (nx_to_tsvector(fulltext_description::character varying));
CREATE INDEX fulltext_fulltext_idx ON fulltext USING gin (nx_to_tsvector(fulltext::character varying));

Changing temporary the PostgreSQL configuration during the import provides performance benefits:

full_page_writes = off
fsync = off
synchronous_commit = off

Do not do this if there is already any data you care about in any database on your PostgreSQL cluster, Please refer to the PostgreSQL reference manual.

Using uuid idType

If you want to use the PostgreSQL uuid type instead of the default varchar(36) (this is the case when you set nuxeo.vcs.idtype=uuid in the nuxeo.conf file) you need to create a new operator to support GIN index on uuid[] type.

CREATE OPERATOR CLASS _uuid_ops DEFAULT
   FOR TYPE _uuid USING gin AS
   OPERATOR 1  &&(anyarray, anyarray),
   OPERATOR 2  @>(anyarray, anyarray),
   OPERATOR 3  <@(anyarray, anyarray),
   OPERATOR 4  =(anyarray, anyarray),
   FUNCTION 1  uuid_cmp(uuid, uuid),
   FUNCTION 2  ginarrayextract(anyarray, internal, internal),
   FUNCTION 3  ginqueryarrayextract(anyarray, internal, smallint, internal, internal, internal, internal),
   FUNCTION 4  ginarrayconsistent(internal, smallint, anyarray, integer, internal, internal, internal, internal),
   STORAGE uuid;

Possible error if you don't create the operator described above is:

ERROR: data type uuid[] has no default operator class for access method "gin"

Limitations

PostgreSQL is very good, very fast, and is our reference database. To be completely honest it still has some limitations that other databases don't have:

  • Its full-text engine doesn't know how to do full-text phrase search, which means we have to use a slower and not completely equivalent workaround when phrase search is required (NXP-6720).

Reporting Problems

If you have a database configuration problem and you want to fill a JIRA ticket, there are some information to report:

  • The PostgreSQL server state: is it dedicated or shared, which OS, how many CPU, RAM, is it a virtual machine...

  • How much memory is available on the database server (free -m output).

  • Amount of Nuxeo documents and PostgreSQL configuration. Using the following commands:

    1. Log in on your database with the postgres user.

      sudo su - postgres
      
    2. Get the Nuxeo SQL script to dump your configuration.

      wget --no-check-certificate https://gist.github.com/bdelbosc/5507796/raw/dump-nuxeo-postgres-config.sql
      
    3. Execute the SQL script with psql against the Nuxeo DB (not the default database named postgres).

      psql nuxeo -f dump-nuxeo-postgres-config.sql
      
  • Attach the output file located in /tmp/pgconf.txt into the JIRA ticket. An example of such a result file is here, so that you can check that yours has the correct format.

  • If you are monitoring the slowest queries (See monitoring section) you can zip and attach the postgresql log file to the JIRA ticket.

Related content in this documentation