Elasticsearch Setup

This page provides several configuration use cases for Elasticsearch.

Setting up an Elasticsearch Cluster

Elasticsearch Supported Versions

The Nuxeo Platform communicates with Elasticsearch using the transport client JAVA API, as stated in the Elasticsearch documentation: "You are encouraged to use the same version on client and cluster sides. You may hit some incompatibility issues when mixing major versions".

We recommend to use the same JVM version for all Elasticsearch nodes and Nuxeo.

The default configuration uses an embedded Elasticsearch instance that runs in the same JVM as the Nuxeo Platform's.

For production you need to setup an Elasticsearch cluster.

Installing the Elasticsearch Cluster

Refer to the Elasticsearch documentation to install and secure your cluster. Basically:

• Don’t run Elasticsearch open to the public.
• Don’t run Elasticsearch as root.
• Disable dynamic scripting (disabled by default since 1.2.X).

Recommended Tuning

If you have a large number of documents or if you use Nuxeo in cluster you may reach the default configuration limitation, here are some recommended tuning:

Consider disabling the OS swapping or using other Elasticsearch option to prevent the heap to be swapped.

In /etc/default/elasticsearch file you can increase the JVM heap to half of the available OS memory:

# For a dedicated node with 12g of RAM
ES_HEAP_SIZE=6g

To prevent indexing errors like:

EsRejectedExceptionException[rejected execution (queue capacity 50)

Increase the bulk queue size In/etc/elasticsearch/elasticsearch.yml configuration file:

threadpool.bulk.queue_size: 500

Configuring Nuxeo to Access the Cluster

Nuxeo manages 3 Elasticsearch indexes:

• The repository index used to index document content, this index can be rebuild from scratch by extracting content from the repository.
• The audit logs index to store audit entries, this index is a primary storage and can not be rebuild.
• A sequence index used to serve unique value that can be used as primary keys, this index is also a primary storage.

To make the connection between the Nuxeo Platform instance and the ES cluster check the following options in the nuxeo.conf file and edit if you need to change the default value:

elasticsearch.addressList=somenode:9300,anothernode:9300
elasticsearch.clusterName=elasticsearch
elasticsearch.indexName=nuxeo
elasticsearch.indexNumberOfReplicas=0
audit.elasticsearch.indexName=${elasticsearch.indexName}-audit
seqgen.elasticsearch.indexName=${elasticsearch.indexName}-uidgen

Where:

• elasticsearch.addressList points to one or many Elasticsearch nodes. Note that Nuxeo connects to the API port 9300 and not the HTTP port 9200.
• elasticsearch.clusterName is the cluster name to join, elasticsearch being the default cluster name.
• elasticsearch.indexName is the name of the Elasticsearch index for the default document repository.
• elasticsearch.indexNumberOfReplicas is the number of replicas. By default you have 5 shards and 1 replicas. If you have a single node in your cluster you should set the indexNumberOfReplicasto 0. Visit the Elasticsearch documentation for more information on shards and replicas.
• audit.elasticsearch.indexName is the name of the Elasticsearch index for audit logs.
• seqgen.elasticsearch.indexName is the name of the Elasticsearch index for the uid sequencer, extensively used for audit logs.

You can find all the available options in the nuxeo.defaults.

Configuring access to the cluster through Elasticsearch Shield plugin

With Shield plugin for Elasticsearch, it is possible to configure authentication to access the cluster, and then prevent unauthorized access to it.

To inform the Nuxeo Platform that authentication is needed on the cluster, the elasticsearch.shield.enabled property has to be set to true (authentication is disabled by default).

The Nuxeo Platform has to be associated to a user who is authorized to access the Elasticsearch cluster. The credentials are provided with the elasticsearch.shield.username and elasticsearch.shield.password properties.

Since 8.10-HF09, it is also mandatory when using Shield authentication to enable encryption traffic inside your cluster by setting up SSL support. This configuration can be done by setting the node’s keystore path and password with the following properties: elasticsearch.shield.keystore.path and elasticsearch.shield.keystore.password. (For more information on setting up encryption traffic, see How to secure communications in your Elasticsearch cluster)

The configuration is done by editing the nuxeo.conf file and set these properties:

elasticsearch.shield.enabled=true
elasticsearch.shield.username=nuxeo
elasticsearch.shield.password=nuxeo
elasticsearch.shield.keystore.path=/path/to/keystore
elasticsearch.shield.keystore.password=myPassword

Disabling Elasticsearch

Elasticsearch is enabled by default, if you want to disable Elasticsearch indexing and search you can simply add the following option to the nuxeo.conf:

elasticsearch.enabled=false

Disabling Elasticsearch for Audit Logs

When Elasticsearch is enabled and the audit.elasticsearch.enabled property is set to true in nuxeo.conf which is the case by default, Elasticsearch is used as a backend for audit logs.

This improves scalability, especially when using Nuxeo Drive with a large set of users.

If you want to disable Elasticsearch and use the SQL database as the default backend for audit logs you can simply update this property in nuxeo.conf:

audit.elasticsearch.enabled=false

Triggering SQL to Elasticsearch Audit Logs Migration

When upgrading a Nuxeo instance from a version lower than 7.3 to 7.3 or higher, if you decide to use Elasticsearch as a backend for audit logs you need to add the following property to nuxeo.conf to trigger the migration of existing audit log entries.

audit.elasticsearch.migration=true

This will launch a background job at server startup to migrate data from the nxp_logs, nxp_logs_extinfo and nxp_logs_mapextinfo tables of the SQL database to the ${audit.elasticsearch.indexName} Elasticsearch index.

Migration uses batch processing. The number of log entries processed per batch can be configured by adding the folllowing property to nuxeo.conf:

audit.elasticsearch.migration.batchSize=5000

Default value is 1000. As an example, we successfully tested migration of 22.000.000 log entries with an average speed of 1500 entries / second using audit.elasticsearch.migration.batchSize=10000 on a Linux virtual machine with two cores, 4 GB RAM, a local PostgreSQL instance and an embedded Elasticsearch instance.

Once the migration is done you should remove the audit.elasticsearch.migration property from nuxeo.conf, else you wil see a warning about it in the logs.

Rebuilding the Repository Index

If you need to reindex the whole repository, you can do this from the Admin > Elasticsearch > Admin tab.

You can fine tune the indexing process using the following options:

• Sizing the indexing worker thread pool. The default size is 4, using more threads will crawl the repository faster:

  elasticsearch.indexing.maxThreads=4
  

• Tuning the number of documents per worker and the number of document submitted using the Elasticsearch bulk API:

  # Reindexing option, number of documents to process per worker
  elasticsearch.reindex.bucketReadSize=500
  # Reindexing option, number of documents to submit to Elasticsearch per bulk command
  elasticsearch.reindex.bucketWriteSize=50
  

Changing the Mappings and Settings of Indexes

Updating the Repository Index Configuration

Nuxeo comes with a default mapping that sets the locale for full-text and declares some fields as being date or numeric.

The default mapping is located in the ${NUXEO_HOME}/templates/common-base/nxserver/config/elasticsearch-config.xml.nxftl.

To override and tune the default mapping:

1. Create a custom template like myapp with a nuxeo.defaults file that contains:

   myapp.target=.
   

2. In this custom template create a nxserver/config/elasticsearch-myapp-config.xml.nxftl file and override the mapping contribution.

   <component name="org.nuxeo.elasticsearch.myapp">
     <require>org.nuxeo.elasticsearch.defaultConfig</require>
     <extension target="org.nuxeo.elasticsearch.ElasticSearchComponent"
       point="elasticSearchIndex">
       <elasticSearchIndex name="nuxeo" type="doc" repository="default">
        <mapping>
   ... Here copy and adapt the default mapping
        </mapping>
       </elasticSearchIndex>
     </extension>
   </component>
   

3. Update the nuxeo.conf to use your custom template.

   nuxeo.templates=default,myapp
   

4. Restart and re-index the entire repository from the Admin tab (see previous section)

For mapping customization examples, see the page Configuring the Elasticsearch Mapping.

Updating the Audit Logs Index Configuration

Here the index is a primary storage and you can not rebuild it. So we need a tool that will extract the _source of documents from one index and submit it to a new index that have been setup with the new configuration.

1. Update the mappings or settings configuration by overriding the {NUXEO_HOME}/templates/common-base/nxserver/config/elasticsearch-audit-index-config.xml(follow the same procedure as the section above for the repository index)
2. Use a new name for the audit.elasticsearch.indexName(like nuxeo-audit2)
3. Start the Nuxeo Platform. The new index is created with the new mapping.
4. Stop the Nuxeo Platform

5. Copy the audit logs entries in the new index using stream2es. Here we copy nuxeo-audit to nuxeo-audit2.

   curl -O download.elasticsearch.org/stream2es/stream2es; chmod +x stream2es
   ./stream2es es --source http://localhost:9200/nuxeo-audit --target http://localhost:9200/nuxeo-audit2 --replace
   

Configuration for Multi Repositories

You need to define an index for each repository. This is done by adding an elasticSearchIndex contribution.

1. Create a custom template as described in the above section "Changing the mapping of the index".

2. Add a second elasticSearchIndex contribution:

   <elasticSearchIndex name="nuxeo-repo2" type="doc" repository="repo2"> ....
   

   Where name is the Elasticsearch index name and repository the repository name.

Investigating and Reporting Problems

Activate Traces

To understand why a document is not present in search results or not indexed, you can activate a debug trace.

Open at the lib/log4j.xml file and uncomment the ELASTIC section:

      <appender name="ELASTIC" class="org.apache.log4j.FileAppender">        
        <errorHandler class="org.apache.log4j.helpers.OnlyOnceErrorHandler" />
        <param name="File" value="${nuxeo.log.dir}/elastic.log" />
        <param name="Append" value="false" />
        <layout class="org.apache.log4j.PatternLayout">
          <param name="ConversionPattern" value="%d{ISO8601} %-5p [%t][%c] %m%X%n" />
        </layout>
      </appender>
      <category name="org.nuxeo.elasticsearch" additivity="false">
        <priority value="TRACE" />
        <appender-ref ref="ELASTIC" />
      </category>

The elastic.log file will contain all the requests done by the Nuxeo Platform to Elasticsearch including the curl command ready to be copy/past/debug in a term.

Reporting Settings and Mapping

It is also important to report the current settings and mapping of an Elasticsearch index (here called nuxeo)

curl localhost:9200/nuxeo/_settings?pretty > /tmp/nuxeo-settings.json
curl localhost:9200/nuxeo/_mapping?pretty > /tmp/nuxeo-mapping.json
# misc info and stats on Elasticsearch
curl localhost:9200 > /tmp/es-info.txt
curl localhost:9200/_cluster/stats?pretty >> /tmp/es-info.txt
curl localhost:9200/_nodes/stats?pretty >> /tmp/es-info.txt
curl localhost:9200/_cat/health?v >> /tmp/es-info.txt
curl localhost:9200/_cat/nodes?v >> /tmp/es-info.txt
curl localhost:9200/_cat/indices?v >> /tmp/es-info.txt

Testing an Analyzer

To test the full-text analyzer:

curl -XGET 'localhost:9200/nuxeo/_analyze?analyzer=fulltext&pretty' -d 'This is a text for testing, file_name/1-foos-BAR.jpg'

To test an analyzer derived from the mapping:

curl -XGET 'localhost:9200/nuxeo/_analyze?field=ecm:path.children&pretty' -d 'workspaces/main folder/folder'

Viewing Indexed Terms for Document Field

This can be done using a customized Luke tool and looking at the Lucene index level, or you can use the aggregates:

# view indexed tokens for dc:title.fulltext of document 3d50118c-7472-4e99-9cc9-321deb4fe053
curl -XGET 'localhost:9200/nuxeo/doc/_search?search_type=count&pretty' -d'{
 "query" : {"ids" : { "values" : ["3d50118c-7472-4e99-9cc9-321deb4fe053"] }},
 "aggs": {"my_aggs": {"terms": {"field": "dc:title.fulltext", "order" : { "_count" : "desc" }, "size": 1000}}}}'

You may need to change the size parameter to get more or less indexed terms.

Comparing the Elasticsearch Index with the Database Content

You can use the esync tool to compare both content and pinpoint discrepancies.

This tool is a read-only standalone tool, it requires both access to the database and Elasticsearch (using transport client on port 9300).

---