Configuration Parameters Index (nuxeo.conf)

The Nuxeo Platform reads configuration properties that you can set either:

In the nuxeo.conf file
By contributing to the Configuration Service
From the Setup tab in the Admin Center (if Nuxeo JSF UI is installed)

nuxeo.conf File

Nuxeo Platform reads configuration properties in the nuxeo.conf file. Those parameters can be either environment parameters used by Nuxeo runtime or template parameters used for values replacement in configuration files.

Existing configuration parameters are listed in the index section below.

Docker Image

In the Docker image, the nuxeo.conf file is located in /etc/nuxeo. Thus, the NUXEO_CONF environment variable is set to /etc/nuxeo/nuxeo.conf.

To add some configuration properties when running a container from a Nuxeo image, you can mount property files as volumes into the /etc/nuxeo/conf.d directory of the container. Each property file will be appended to nuxeo.conf during startup, ordered by filename.

For instance, to append the following postgresql.conf file to nuxeo.conf:

nuxeo.db.name=nuxeo
nuxeo.db.user=nuxeo
nuxeo.db.password=nuxeo
nuxeo.db.host=localhost
nuxeo.db.port=5432

you can run:

docker run --name nuxeo -p 8080:8080 -v /path/to/postgresql.conf:/etc/nuxeo/conf.d/postgresql.conf docker-private.packages.nuxeo.com/nuxeo/nuxeo:2021

Tomcat Server ZIP

In the Tomcat server ZIP, the nuxeo.conf file is located in $NUXEO_HOME/bin.

If you plan to use the application in production, you should move the configuration file outside the Nuxeo home directory, to make upgrades easier and more secured: your data and configuration won't risk to be overridden or lost.

For Windows users

Do not use Office writers, nor Notepad.

Wordpad is fine, Notepad++ and SciTE are good text editors, there are lots of other text editors.

Admin Center/Setup Tab

JSF UI Deprecation

This requires to have the JSF UI addon installed on your server that is deprecated since Nuxeo Platform LTS 2019.
Please refer to the Web UI documentation.

Administrators can also change the nuxeo.conf configuration parameters from the Admin center.

To edit the configuration of the application using the Admin Center:

Log in with an administrator account. Default administrator credentials are:
- login: Administrator
- password: Administrator
Click on the Admin tab in the page header.
Click on the Setup tab, edit the configuration you want to change and click on Save.
If indicated as needed on top of the page, restart the server.

You can also take a look at the following page for recommendations and examples.

Configuration Parameters Index

The properties that can be set in nuxeo.conf are below. Properties that can be contributed to the Configuration service are available from the Nuxeo Platform Explorer.

`JAVA_HOME`

Path to Java home directory.

Default Value

None.

If undefined nuxeoctl script will try to discover it.

`JAVA_OPTS`

Optional settings passed to the JVM.
Nuxeo requires at least 1024 MB of JVM heap size. By setting the maximum heap size to 25% of the available memory, this requirement is satisfied on a machine with at least 4 GB of RAM.

Default Value

-XX:InitialRAMPercentage=3 -XX:MaxRAMPercentage=25 -Dfile.encoding=UTF-8
-Dmail.mime.decodeparameters=true -Dnet.sf.ehcache.skipUpdateCheck=true
-Djava.util.Arrays.useLegacyMergeSort=true -Dsun.net.http.retryPost=false

`launcher.start.max.wait`

In seconds. Maximum time to wait for effective Nuxeo server start before giving up (applies on commands "start" and "restart").

Default Value

300

`launcher.stop.max.wait`

In seconds. Maximum time to wait for effective Nuxeo server stop cleanly before using forced stop.

Default Value

60

`launcher.override.java.tmpdir`

Possible values: true or false .
If true, will set java.io.tmpdir = ${nuxeo.tmp.dir}.

Default Value

true

`nuxeo.log.dir`

Log directory (absolute or relative to NUXEO_HOME).
Linux recommended path: /var/log/nuxeo/...

Default Value

log

`nuxeo.pid.dir`

Directory where to store Nuxeo PID file (absolute or relative to NUXEO_HOME).

Default Value

log

`nuxeo.data.dir`

Data directory (absolute or relative to NUXEO_HOME). It involves all data not being stored in database.
Linux recommended path: /var/lib/nuxeo/...

Default Value

nxserver/data

`nuxeo.tmp.dir`

Location of the temporary files (absolute or relative to NUXEO_HOME).

Default Value

tmp

`nuxeo.startup.clean.tmp.dir`

Since HF9

Clean up the temporary directory on Nuxeo startup.

Default Value

false

`nuxeo.mp.dir`

Nuxeo Packages directory (absolute or relative to NUXEO_HOME).

Default Value

packages

`nuxeo.force.generation`

If "true", will force generation of configuration files; otherwise they are only generated when not existing.
If "once", will force one time and switch to false after successful generation.
If "false", configuration changes are ignored.

Default Value

true | once

`nuxeo.templates`

Comma separated list of templates to include.
Templates paths are absolute or relative to $NUXEO_HOME/templates/.
Available templates: postgresql, mongodb, custom, ...

Default Value

default

`nuxeo.append.templates.*`

Since HF2

Comma separated list of templates to include after the ones included by nuxeo.templates.
The * is to be replaced by something relevant to what you want to append.
For example, you could use mongo to append mongodb and mongodb-audit templates as below:

nuxeo.templates=docker
nuxeo.append.templates.mongo=mongodb,mongodb-audit

The included templates will be: docker,mongodb,mongodb-audit.

When several nuxeo.append.templates.* are present, they are first sorted alphabetically, then appended, so in the example below:

nuxeo.templates=docker
nuxeo.append.templates.mongo=mongodb,mongodb-audit
nuxeo.append.templates.binary=s3binaries

The included templates will be: docker,s3binaries,mongodb,mongodb-audit.

`nuxeo.bind.address`

Server binding address. "0.0.0.0" means "all available network interfaces".
WARNING: When changing nuxeo.bind.address, you must accordingly change nuxeo.loopback.url.

Default Value

0.0.0.0

`nuxeo.server.http.port`

Server HTTP listen port.

Default Value

8080

`nuxeo.server.http.connectionUploadTimeout`

Configure the Tomcat connectionUploadTimeout to specify the timeout, in milliseconds, to use while a data upload is in progress.

Default Value

60000

`nuxeo.server.ajp.enabled`

Enable Tomcat AJP connector.

Default Value

false

`nuxeo.server.ajp.port`

Server AJP listen port.

Default Value

8009

`nuxeo.server.cookies.sameSite`

Allows setting the same site cookie policy.

Possible values: none, lax or strict.

Default Value

lax

`nuxeo.server.jvmRoute`

Server AJP route for load-balancing

Default Value

nuxeo

`nuxeo.server.tomcat_admin.host`

Tomcat server's "admin" host.
This is the address on which the server waits for a shutdown command.

Default Value

localhost

`nuxeo.server.tomcat-admin.port`

Deprecated since Nuxeo 5.6

Replaced by nuxeo.server.tomcat_admin.port. Tomcat server's "admin" port.
This is only useful if you have another Tomcat server running and want to avoid port conflicts.

Default Value

8005

`nuxeo.server.tomcat_admin.port`

Tomcat server's "admin" port.
Replaces nuxeo.server.tomcat-admin.port. This is only useful if you have another Tomcat server running and want to avoid port conflicts.

Default Value

8005

`nuxeo.server.tomcat_error.show_report`

Tomcat report displayed or not on Tomcat error page.

Default Value

false

`nuxeo.server.tomcat_error.show_server_info`

Tomcat version info (as Tomcat server version) displayed or not on Tomcat error page.

Default Value

false

`nuxeo.server.https.port`

Server HTTPS listen port.
This is only useful if you have modified the application server to use HTTPS.

Default Value

8443

`nuxeo.server.signature`

If set, this will replace the default value of the "Server:" HTTP response header.

Default Value

None.

`org.nuxeo.ecm.instance.name`

Server name.

Default Value

Nuxeo 5.9.3-SNAPSHOT

`org.nuxeo.ecm.instance.description`

Server description.

Default Value

Nuxeo

`org.nuxeo.ecm.product.name`

Product name, displayed in the page title on your browser.

Default Value

Nuxeo Platform

`org.nuxeo.ecm.product.version`

Default Value

5.9.3-SNAPSHOT

`org.nuxeo.dev`

This property uses the "dev" mode when running the Nuxeo application. This parameter should not be set to true on a production server, as it disables some caches, and enables hot redeploy of some JARs (Studio JARs for instance). For more information about the dev mode, see How to do incremental deployment (hot reload).

Before 5.6, setting this property to true stopped the runtime when an error occured at deployment. This behaviour has been removed from the dev mode and is now controlled by the property org.nuxeo.runtime.strict.

Default Value

false

`org.nuxeo.prod`

Setting this property to "true" will display a quite visible warning message in the Admin tab, stating that this is a production instance. This is useful for administrators who are sometimes confusing their Nuxeo production server with their test server (not to rat anyone out).

Default Value

false

`org.nuxeo.rest.exception.message.enabled`

Are the exception messages shown in the Rest API responses. If not enabled, "An error occured" message is returned instead.

Default Value

true

`org.nuxeo.rest.stack.enable`

You can enable this mode if you'd like to display exception stacktraces in JSON response when error occurs after REST calls.

See Web Exceptions documentation to get modes description and examples.

Default Value

false

`org.nuxeo.automation.trace`

Enable this mode if you'd like to display automation traces during runtime:

You'll benefit from exhaustive logs to debug all automation chain and/or operation execution.
The automation trace mode is disabled by default (not suitable for production).
It can be activated through JMX via org.nuxeo:TracerFactory MBean during runtime.

Default Value

false

`org.nuxeo.automation.trace.printable`

By default, all automation executions are 'printable' (appear in logs) when automation trace mode is on.

You can filter chain and/or operation execution trace printing by setting this property to chain name and/or operation separated by comma.
Comment this property to get all automation chains/operations back in printing (by default set to * (star))

Default Value

*

`templateName.include` - only available in template properties

Templates to include prior to the one being included.

`templateName.target` - only available in template properties

Directory where templateName files will be deployed (relative to NUXEO_HOME).

Default Value

nxserver

`mail.store.protocol`

Server protocol parameters for e-mailing.

Default Value

pop3
smtp

`mail.user`

User who will receive e-mail (unused in Nuxeo).

Default Value

nobody

`mail.store.host`

e-Mail server.

Default Value

localhost

`mail.store.user`

Default Value

anonymous

`mail.store.password`

Default Value

password

`mail.debug`

Enable debugging output from the JavaMail classes.

Default Value

false

`nuxeo.notification.eMailSubjectPrefix`

Subject prefix in Nuxeo notification e-mails.

Default Value

[Nuxeo]

`nuxeo.notification.eMailSigner`

Signer of the sent e-mail.

Default Value

The Nuxeo team

`notification.check.read.permission`

Do not send notification to users without read permission on targeted documents.

Default Value

false

`mail.transport.host`

SMTP gateway server.

Default Value

localhost

`mail.transport.port`

e-Mail server port.

Default Value

25 (without authentication)
587 (with authentication)
465 (SSL)

`mail.transport.usetls`

Use TLS for the SMTP connection.

Default Value

false

`mail.transport.auth`

Default Value

true

`mail.transport.user`

Default Value

anonymous

`mail.transport.password`

Default Value

password

`mail.from`

The e-mail address will be sent from.

Default Value

`[email protected]`

`nuxeo.db.name`

Database name.

Default Value

nuxeo | NUXEO

`nuxeo.db.user`

Database username.

Default Value

sa | nuxeo

`nuxeo.db.password`

Database password.

Default Value

(empty value) | password

`nuxeo.db.host`

Database host URL.

Default Value

localhost

`nuxeo.db.port`

Database host port.

Default Value

3700 (DB2)
5432 (PostgreSQL)
3306 (MySQL)
1521 (Oracle)
1433 (MSSQL)

`nuxeo.db.jdbc.url`

Database JDBC connection URL for Nuxeo datasources, for instance jdbc:postgresql://${nuxeo.db.host}:${nuxeo.db.port}/${nuxeo.db.name}.

Default Value

(database-dependent)

`nuxeo.db.validationQuery`

Database validation query, a SELECT statement used to check connections before using them, usually SELECT 1. Using this has a noticeable speed impact but makes connections resilient to network or sever problems.

`nuxeo.db.min-pool-size`

Database minimum pool size for Nuxeo datasources.

Default Value

5

`nuxeo.db.max-pool-size`

Database maximum pool size for Nuxeo datasources.

Default Value

100 (Tomcat)

`nuxeo.db.idle-timeout-minutes`

Database timeout after which connections not in use are removed from the pool.

Default Value

5

`nuxeo.db.xaMode`

Enable XA mode (required if multiple datasources configured)

Default Value

false

`nuxeo.vcs.min-pool-size`

Database minimum pool size for Nuxeo repository (VCS).

Default Value

0

`nuxeo.vcs.max-pool-size`

Database maximum pool size for Nuxeo repository (VCS).

Default Value

20

`nuxeo.vcs.blocking-timeout-millis`

Database maximum wait time to get a connection from the pool when all connections are in use, for Nuxeo repository (VCS).

Default Value

100

`nuxeo.vcs.idle-timeout-minutes`

Database timeout after which connections not in use are removed from the pool, for Nuxeo repository (VCS).

Default Value

10

`nuxeo.vcs.fulltext.disabled`

Whether full text indexing and querying should be completely disabled in the repository. See VCS for details.

Default Value

false

`nuxeo.vcs.fulltext.search.disabled`

Full text querying from VCS (database backend) is disabled, full text extraction is done. See VCS for details.

Default Value

false

`nuxeo.vcs.fulltext.analyzer.language`

Full text analyzer language. Only applies topostgresql and mssql database types.

Default Value

english

`nuxeo.vcs.noddl`

Where DDL generation should be disabled in the repository. See VCS for details.

Default Value

false

`nuxeo.vcs.ddlmode`

What kind of DDL generation is done. See VCS for details.

Default Value

execute

`nuxeo.vcs.idtype`

The type of id column. See VCS for details.

Default Value

varchar

`nuxeo.vcs.copy.findFreeName.disabled`

Set to true to disable free-name detection and let the database raise a constraint error in case of collisions if the constraints have been added by hand.

Default Value

false

`nuxeo.url`

Application URL (without final slash), should be the public URL of your server (i.e.: http://www.yourdomain.com/....)
It is also used for emails sent out and to detect images in HTML documents when converting to PDF.

Default Value

http://localhost:8080/nuxeo

`nuxeo.loopback.url`

Nuxeo URL, for connections from Nuxeo to itself (theme banks default). The port should be the same as nuxeo.server.http.port.
If not explicitly configured, the loop back URL is generated from nuxeo.bind.address, nuxeo.server.http.port and org.nuxeo.ecm.contextPath values.

Default Value

http://localhost:8080/nuxeo

`org.nuxeo.ecm.contextPath`

Application context path.
Note: Changing this parameter is not enough. See How to Change Context Path

Default Value

/nuxeo

`repository.clustering.enabled`

DEPRECATED since LTS 2021, use nuxeo.cluster.enabled
Activate clustering mode.

Default Value

false

`repository.clustering.id`

DEPRECATED since LTS 2021, use nuxeo.cluster.nodeid
The cluster node id for this Nuxeo instance. This can be any arbitrary string.

`repository.clustering.delay`

When clustering is activated, defines the delay during which invalidations don't need to be processed (expressed in milliseconds).

Default Value

1000

`repository.clustering.invalidation`

Allows the configuration of VCS cluster invalidations. The value default uses VCS.

Default Value

default

`repository.binary.store`

DEPRECATED.
Defines the folder where binaries are stored. Useful when using clustering or to change the location of binaries to another location. This parameter is still in use in existing configurations: for new installation, use nuxeo.binarystores.root

Default Value

default

`nuxeo.binarystores.root`

Defines the root folder where all binaries are stored. Useful when using clustering or to change the location of binaries to another location (See NXP-27109 for more details).

`nuxeo.cluster.enabled`

Activate clustering mode.

Default Value

false

`nuxeo.cluster.nodeid`

The cluster node id for this Nuxeo instance. This can be any arbitrary string.

`nuxeo.core.binarymanager`

Custom class for the Binary Manager, to replace the default file-base storage.

`nuxeo.core.binarymanager_key`

Key configuration for the binary manager, if applicable.

`nuxeo.plaintext_parsing_extensions`

Files extensions being parsed for parameters replacement when copying templates.

Default Value

xml,properties

`zip.entry.encoding`

Choose how to encode filename when exporting documents to zip in the worklist.
The ZIP entries names are encoded in UTF8 by default. If you want to get the old behavior back (having entry name encoded in ascii), use zip.entry.encoding=ascii.

`org.nuxeo.ecm.platform.liveedit.autoversioning`

Default Value

none, minor, major

`nuxeo.http.proxy.host`

HTTP proxy host.

`nuxeo.http.proxy.port`

HTTP proxy port.

`nuxeo.http.proxy.login`

HTTP proxy login.

`nuxeo.http.proxy.password`

HTTP proxy password.

`nuxeo.http.proxy.ntlm.host`

NT Lan Manager (NTLM) Proxy. Host name of the Windows machine running the Nuxeo server.

`nuxeo.http.proxy.ntlm.domain`

NT Lan Manager (NTLM) Proxy. Domain name to authenticate against.

`nuxeo.http.proxy.pac.url`

Proxy auto-config (PAC) file URL.

`facelets.REFRESH_PERIOD`

Indicates to the compiler the number of seconds to wait between subsequent checks for changes in modified JSF facelets in a running application. Useful for facelet debugging.
To disable this compiler check use a value of -1 which is a recommended value for production deployments as compiler checks have an impact on application performance.
The parameter undefined should be used instead as it forces this parameter to value "2".

Default Value

-1

`nuxeo.db.transactiontimeout`

Database transaction timeout in seconds (available for Tomcat server only)

Default Value

300

`server.status.key`

Secure key for connecting to server status monitoring servlet. It is randomly generated if not set.
It is also used by defaultfor sensitive configuration data encryption, see server.crypt.secretkey.

`session.timeout`

Session timeout (see web.xml session-timeout).

Default Value

60

`session.config.tracking.mode.cookie`

Session tracking mode.
If true, prevents Tomcat from appending the jsessionid parameter to the URLs, for example a file download URL. Yet, cookies need to be enabled in the browser.
Otherwise, the jsessionid parameter might be appended to some URLs, for instance when sharing a document permalink to an anonymous user or when clearing the browser's cookies. Yet, cookies don't need to be enabled in the browser.

Default Value

true

`nuxeo.updatecenter.disabled`

Disables the Update Center feature.

Default Value

false (unset)

`org.nuxeo.big.file.size.limit`

Redirects onto the big file download URL if size exceeds limit.

Default Value

5Mi (unset)

`org.nuxeo.ecm.platform.ui.web.auth.NuxeoAuthenticationFilter.isLoginNotSynchronized`

Disables login synchronization.

Default Value

false (unset)

`nuxeo.jsf.numberOfConversationsInSession`

Parameter to control the number of conversation states that are saved in session. Each conversation holds a number of view states that is defined by nuxeo.jsf.numberOfViewsInSession

Default Value

4

`nuxeo.jsf.numberOfViewsInSession`

Parameter to control the JSF init parameter com.sun.faces.numberOfViewsInSession

Default Value

4

`nuxeo.jsf.numberOfLogicalViews`

Parameter to control the JSF init parameter com.sun.faces.numberOfLogicalViews

Default Value

4

`nuxeo.jsf.tmp.dir`

Faces Servlet multi-part config: an absolute path to a directory on the file system. The location attribute does not support a path relative to the application context. This location is used to store files temporarily while the parts are processed or when the size of the file exceeds the specified fileSizeThreshold setting. The default location is "".

Default Value

nuxeo.tmp.dir (unset)

`nuxeo.jsf.maxFileSize`

Faces Servlet multi-part config: the maximum size allowed for uploaded files, in bytes. The default size is unlimited.

Default Value

-1 (unlimited) (unset)

`nuxeo.jsf.maxRequestSize`

Faces Servlet multi-part config: the maximum size allowed for a multipart/form-data request, in bytes. The default size is unlimited.

Default Value

-1 (unlimited) (unset)

`nuxeo.jsf.fileSizeThreshold`

Faces Servlet multi-part config: The file size in bytes after which the file will be temporarily stored on disk. The default size is 0 bytes.

Default Value

0 (unset)

`nuxeo.vcs.use-nulls-last-on-desc`

Ask the database to use "NULLS LAST" when sorting DESC. True by default to get the same result order between different databases.
Also turning this option to false enable PostgreSQL and Oracle to use an index on the sorted column which can be huge performance improvement.

Default Value

true (unset)

`org.nuxeo.connect.connector.cache.duration`

Nuxeo Packages list cache (in minutes).

Default Value

60min (5min for Studio packages)

`org.nuxeo.connect.server.reachable`

Launcher online/offline mode for connections to Nuxeo Connect.

Default Value

true

`org.nuxeo.connect.url`

Nuxeo Connect URL.

Default Value

https://connect.nuxeo.com/nuxeo/site/

`nuxeo.automation.properties.multiline.escape`

Enable/Disable multi-line strings escaped with a trailing \ when using Document.Update or Workflow.SetWorkflowVariables Automation operations.

Default Value

false

`org.nuxeo.cmis.joins`

When true, CMISQL JOINs are allowed if VCS is used.

Default Value

false

`org.nuxeo.cmis.proxies`

If false, proxies are not visible through CMIS. Cannot be true if org.nuxeo.cmis.joins is true.

Default Value

true

`org.nuxeo.cmis.enableComplexProperties`

When true, complex properties are exposed as JSON-encoded strings.

Default Value

false

`nuxeo.security.allowNegativeACL`

When true, enables adding negative ACL (deny permissions) in the UI, otherwise only grant permissions are available.

Default Value

false

`audit.elasticsearch.enabled`

See Disabling Elasticsearch for Audit Logs.
Defaults to false on server upgrade, true on new install.

Default Value

false | true

`audit.elasticsearch.indexName`

Name of the Elasticsearch index for audit logs.

Default Value

${elasticsearch.indexName}-audit

`seqgen.elasticsearch.indexName`

Name of the Elasticsearch index for the uid sequencer.

Default Value

${elasticsearch.indexName}-uidgen

`audit.elasticsearch.migration`

See Triggering SQL to Elasticsearch Audit Logs Migration

Default Value

false

`audit.elasticsearch.migration.batchSize`

See Triggering SQL to Elasticsearch Audit Logs Migration

Default Value

1000

`elasticsearch.httpReadOnly.baseUrl`

Required when using a standalone Elasticsearch instance. See Elasticsearch Passthrough

Default Value

http://localhost:9200/

`org.nuxeo.cmis.elasticsearch`

To send the CMISQL queries to Elasticsearch, set to true.

Default Value

false

`server.crypt.secretkey`

Custom secret key used for sensitive configuration data encryption. It takes either a raw value or an URL (e.g. file:///path/to/secretkey or http://some.online.file.com).

Default Value

${server.status.key}

`server.crypt.keystore.path`

Path to the keystore to use for sensitive configuration data encryption.

Default Value

${javax.net.ssl.keyStore}

`server.crypt.keystore.pass`

The password used to protect the integrity of the keystore contents.

Default Value

${javax.net.ssl.keyStorePassword:="changeit"}

`server.crypt.keyalias`

The alias prefix where to retrieve the secret key from the keystore. It is automatically suffixed with the algorithm ("AES" or "DES").

`nuxeo.virtual.host`

This parameter can be used to replace the nuxeo-virtual-host request header (usually when using HTTPS) when it is not possible to set it at the reverse-proxy level.
The use of the header is still preferred as the parameter forces your Nuxeo instance to be accessible from one URL only.
Example: https://my.nuxeo.com/

`elasticsearch.enabled`

Switch to enable/disable Elasticsearch usage

Default Value

true

`elasticsearch.client`

Choose between TransportClient and RestClient protocols

Default Value

RestClient

`elasticsearch.indexName`

Name of the Elasticsearch index for the default document repository

Default Value

nuxeo

`elasticsearch.addressList`

For TransportClient protocol a comma separated list of Elasticsearch node host:port. For RestClient protocol a comma separated list of URL. If empty an in JVM embedded Elasticsearch node is used, the embedded node is only for testing and it is not supported for production.

`elasticsearch.clusterName`

Name of the Elasticsearch cluster to join when using a TranportClient protocol

Default Value

nuxeoCluster

`elasticsearch.indexNumberOfReplicas`

Number of replicas (not for local node)

Default Value

1

`elasticsearch.indexNumberOfShards`

Number of shards (not for local node)

Default Value

5

`elasticsearch.nodeName`

Name of the local node

Default Value

nuxeoNode

`elasticsearch.httpEnabled`

Does the local node accept HTTP request on port 9200

Default Value

false

`elasticsearch.override.pageproviders`

Comma separated list of CorePageProvider names to supersede by Elasticsearch

Default Value

default_search,DEFAULT_DOCUMENT_SUGGESTION

`elasticsearch.reindex.bucketReadSize`

Reindexing option, number of documents to process per worker

Default Value

500

`elasticsearch.reindex.bucketWriteSize`

Reindexing option, number of documents to submit to Elasticsearch per bulk command

Default Value

100

`elasticsearch.indexing.maxThreads`

Maximum size of the indexing thread pool

Default Value

4

`elasticsearch.indexing.clearCompletedAfterSeconds`

Time to keep the completed indexing worker states

Default Value

90

`elasticsearch.adminCenter.displayClusterInfo`

Display Elasticsearch cluster and nodes information in the admin center @since 6.0-HF06, always true for embedded mode

Default Value

false

`elasticsearch.reindex.onStartup`

Reindex the repository content on startup if the index is empty

Default Value

false

`elasticsearch.index.recursive.bulkService`

Use the Bulk Service instead of the WorkManager for recursive and potentially long indexing, this improves the UX because synchronous indexing is eagerly handled by the WorkManager. Note that when activating this option it is recommended to use Kafka to have a distributed Bulk Service.

Since LTS 2021.21, LTS 2019 HF62

Default Value

false

`elasticsearch.restClient.connectionTimeoutMs`

A timeout in milliseconds until a connection is established

Default Value

30000

`elasticsearch.restClient.socketTimeoutMs`

A maximum period, in milliseconds, of inactivity between two consecutive data packets

Default Value

121000

`elasticsearch.restClient.username`

A username for client basic authentication

`elasticsearch.restClient.password`

A password for client basic authentication

`elasticsearch.restClient.keystorePath`

A path to a valid keystore

`elasticsearch.restClient.keystorePassword`

The keystore password

`elasticsearch.restClient.keystoreType`

The type of keystore, e.g. jks

Default Value

Default Java system keystore type

`elasticsearch.index.translog.durability`

The translog durability for Elasticsearch indexes. To reduce disk IO and increase performance this can be tuned to async.

Default Value

request

`nuxeo.directory.type`

Type of directory, used for LDAP or multi-directory configuration. Possible values are default, ldap, multi.

Default Value

default

`nuxeo.user.anonymous.enable`

When LDAP is enabled and this parameter is set to true, allows anonymous login with Guest user

Default Value

false

`nuxeo.user.emergency.enable`

When LDAP is enabled and this parameter is set to true, declares an emergency user to connect to Nuxeo in case of LDAP issues

Default Value

false

`nuxeo.user.emergency.username`

The username of emergency user when nuxeo.user.emergency.enable is set to true

Default Value

MyAdministrator

`nuxeo.user.emergency.password`

The password of emergency user when nuxeo.user.emergency.enable is set to true

Default Value

secret

`nuxeo.user.emergency.firstname`

The firstname of emergency user when nuxeo.user.emergency.enable is set to true

`nuxeo.user.emergency.lastname`

The lastname of emergency user when nuxeo.user.emergency.enable is set to true

`nuxeo.picture.migration.enabled`

When set to false allows to disable the picture migration that is run on startup and that can be slow on big volume.

Default Value

true

`nuxeo.dbs.cache.enabled`

Whether or not the cache is enabled

Default Value

true

`nuxeo.dbs.cache.concurrencyLevel`

Guava cache parameter: Guides the allowed concurrency among update operations. Used as a hint for internal sizing. The table is internally partitioned to try to permit the indicated number of concurrent updates without contention. Because assignment of entries to these partitions is not necessarily uniform, the actual concurrency observed may vary. Ideally, you should choose a value to accommodate as many threads as will ever concurrently modify the table. Using a significantly higher value than you need can waste space and time, and a significantly lower value can lead to thread contention. But overestimates and underestimates within an order of magnitude do not usually have much noticeable impact. A value of one permits only one thread to modify the cache at a time, but since read operations and cache loading computations can proceed concurrently, this still yields higher concurrency than full synchronization.

Default Value

10

`nuxeo.dbs.cache.maxSize`

The maximum size of DBS cache

Default Value

1000

`nuxeo.dbs.cache.ttl`

The expire after write value in minutes

Default Value

10

`kafka.enabled`

Switch the default Stream configuration to Apache Kafka

Default Value

false

`kafka.zkServers`

Deprecated since 10.2, Nuxeo doesn't need Zookeeper access

Default Value

localhost:2181

`kafka.bootstrap.servers`

host:port comma separated list of Kafka Brokers

Default Value

localhost:9092

`kafka.default.replication.factor`

Default replication factor per partition when creating a new Topic

Default Value

1

`kafka.topicPrefix`

The prefix applied to any Kafka Topic

Default Value

nuxeo-

`kafka.request.timeout.ms`

Request timeout between Nuxeo and a Kafka broker

Default Value

30000

`kafka.default.api.timeout.ms`

Default timeout for consumer API related to position

Default Value

120000

`kafka.max.poll.interval.ms`

Maximum delay between poll invocation

Default Value

7200000

`kafka.max.poll.records`

Maximum number of records to read per poll

Default Value

2

`kafka.session.timeout.ms`

Consumers that don't send heartbeat during this delay are removed from the group

Default Value

50000

`kafka.heartbeat.interval.ms`

Heartbeat interval

Default Value

4000

`kafka.delivery.timeout.ms`

Timeout for a producer to get an acknowledgement

Default Value

120000

`kafka.acks`

The number of acknowledgments expected by a producer

Default Value

1

`kafka.sasl.enabled`

Enable SASL authentication to communicate with Kafka brokers

Default Value

false

`kafka.security.protocol`

When using SASL authentication, choose the protocol to communicate with brokers, valid values are: PLAINTEXT, SSL, SASL_PLAINTEXT, SASL_SSL

Default Value

SASL_PLAINTEXT

`kafka.sasl.mechanism`

SASL mechanism used for client connections

Default Value

SCRAM-SHA-256

`kafka.sasl.jaas.config`

JAAS login context parameters for SASL connections in the format used by JAAS configuration files. See Kafka documentation for more information.

`kafka.ssl`

Use SSL to communicate with Kafka Broker

Default Value

false

`kafka.truststore.path`

The location of the trust store file, empty path means no truststore.

`kafka.truststore.type`

The file format of the trust store file

Default Value

JKS

`kafka.truststore.password`

The password for the trust store file. If a password is not set access to the truststore is still available, but integrity checking is disabled.

`kafka.keystore.path`

The location of the key store file used by the client for two-way authentication, empty value means no keystore.

`kafka.keystore.type`

The file format of the key store file

Default Value

JKS

`kafka.keystore.password`

The store password for the key store file

`nuxeo.stream.audit.enabled`

Enable the Nuxeo Stream Audit Writer implementation

Default Value

true

`nuxeo.stream.audit.log.config`

The Log configuration to use for the Stream Audit Writer

Default Value

audit

`nuxeo.stream.audit.batch.size`

The entries batch size to submit the the audit backend

Default Value

25

`nuxeo.stream.audit.batch.threshold.ms`

Do not wait more than this threshold if the batch is not full

Default Value

500

`nuxeo.stream.work.enabled`

Supersed the default WorkManager with the Sream WorkManager

Default Value

false

`nuxeo.stream.work.log.config`

The Log configuration to use for the Stream WorkManager

Default Value

work

`nuxeo.stream.work.over.provisioning.factor`

The factor to use on the Work Thread pool size to get the number of Log partition.

Default Value

3

`nuxeo.stream.work.computation.filter.enabled`

Filter work with a serialized size that exceed a threshold so they are stored outside of the stream.

Default Value

false

`nuxeo.stream.work.computation.filter.thresholdSize`

Threshold in bytes that is used to store work outside of the stream.

Default Value

1000000

`nuxeo.stream.work.computation.filter.class`

The class that implement the external storage of large work. Default is using a Transient store, there is also a KeyValue implementation org.nuxeo.ecm.core.work.KeyValueStoreOverflowRecordFilter.

Default Value

org.nuxeo.ecm.core.transientstore.computation.TransientStoreOverflowRecordFilter

`nuxeo.stream.work.computation.filter.storeName`

The storage name to use.

Default Value

default

`nuxeo.stream.work.computation.filter.storeKeyPrefix`

A key prefix to use on the external storage.

Default Value

bigRecord:

`nuxeo.stream.work.computation.filter.storeTTL`

The time to live used the KeyValue storage implementation. This does not apply to the Transient store where the retention is fixed by its configuration.

Default Value

4d

`org.nuxeo.runtime.reload_strategy`

The strategy to use when hot reloading Nuxeo Server.
There're two possible values, changing slightly the before/after reload logic:

standby: components are stopped, new/former components are deployed/undeployed, components are started
restart: components are stopped, then de-activated, new/former components are deployed/undeployed, components are activated, then started

Default Value

standby

`nuxeo.selection.selectAllEnabled`

Enables users to select all documents from results listings in the UI and to execute a bulk action on them. Learn more with the bulk actions documentation.

Since LTS 2021.7

Requires the Web UI package in version 3.0.6 or above

Default Value

false

`nuxeo.oauth2.token.expiration.duration`

Property to set the oauth2 token expiration duration. Default is 60 minutes.

Since LTS 2021.14

Default Value

60m

`nuxeo.s3storage.s3DirectUpload.bucket_prefix`

Property to specify the bucket prefix of the blob provider backing the transient store used by the S3 batch handler. Default is s3DirectUpload.

Since LTS 2023

Default Value

s3DirectUpload

`nuxeo.server.https.keyAlias`

Property to configure the alias name for the certificate used in the HTTPS configuration. Default is tomcat.

Since LTS 2023

Default Value

tomcat

`nuxeo.transientstore.provider`

Property to use a MongoDB optimized implementation of the transient store, replacing the KeyValueTransientStore implementation. Default is mongodb.

Since LTS 2023

Default Value

mongodb

`nuxeo.bulk.action.recomputeThumbnails.maxRetries`

Property to configure the maximum number of retries for recompute thumbnails bulk actions. Default is 1.

Since LTS 2023

Default Value

1

`nuxeo.bulk.action.recomputeViews.maxRetries`

Property to configure the maximum number of retries for recompute views bulk actions. Default is 1.

Since LTS 2023

Default Value

1

`nuxeo.bulk.action.recomputeVideoConversions.maxRetries`

Property to configure the maximum number of retries for recompute video conversions bulk actions. Default is 1.

Since LTS 2023

Default Value

1

`nuxeo.aceinfo.gc.enabled`

Property to enable aceinfo directory garbage collection when a document is deleted. Default is false.

Since LTS 2023

Default Value

false

`kafka.default.replication.factor`

Property to allow relying on the default Kafka broker topic replication factor when creating a new topic. Default is -1. Note that it works only with a Kafka cluster >= 2.4. If you want to use an older Kafka cluster, you have to set explicitly the replication factor in Nuxeo to something > 0.

Since LTS 2023

Default Value

-1

`nuxeo.document.routing.escalation.legacy`

Property to enable back the WorkManager implementation for workflow escalation rules, instead of the Bulk Action Framework. Default is false.

Since LTS 2023

Default Value

false

`nuxeo.routing.cleanup.workflow.instances.orphan`

Property to make the DocumentRoutingWorkflowInstancesCleanup listener remove orphan workflows daily, along with workflows in state done or canceled. Default is false.

Since LTS 2023

Default Value

false

`nuxeo.bulk.action.blobGC.enabled`

Property to enable immediate document's blobs garbage collection. Default is true.

Since LTS 2023

Default Value

true

`nuxeo.content.security.policy`

Property to override the default Content Security Policy.

Since LTS 2023.16

`org.nuxeo.pagination.nuxeoSelectOptions.maxAllowedItems`

Set the maximum number of pages in the Nuxeo select element for pagination. If the page count exceeds this number, the drop-down to select the page number is hidden. This is intended to prevent browser performance issues with large numbers of pages.

Requires the Web UI package version 3.1.12 or above

Default Value

1000

`org.nuxeo.web.ui.trustedDomains`

Enables users to specify a list of domains to which navigation is allowed when using a multi-repository configuration. Takes a list of domains separated by a comma (for example, hyland.com,hyland.net). Allows a redirect to any domain when left empty. Meant as a potential security enforcement option.

Requires the Web UI package version 3.1.12 or above

Default Value

''

Configuration Parameters Index (nuxeo.conf)

nuxeo.conf File

Docker Image

Tomcat Server ZIP

Admin Center/Setup Tab

Configuration Parameters Index

JAVA_HOME

JAVA_OPTS

launcher.start.max.wait

launcher.stop.max.wait

launcher.override.java.tmpdir

nuxeo.log.dir

nuxeo.pid.dir

nuxeo.data.dir

nuxeo.tmp.dir

nuxeo.startup.clean.tmp.dir

nuxeo.mp.dir

nuxeo.force.generation

nuxeo.templates

nuxeo.append.templates.*

nuxeo.bind.address

nuxeo.server.http.port

nuxeo.server.http.connectionUploadTimeout

nuxeo.server.ajp.enabled

nuxeo.server.ajp.port

nuxeo.server.cookies.sameSite

nuxeo.server.jvmRoute

nuxeo.server.tomcat_admin.host

nuxeo.server.tomcat-admin.port

nuxeo.server.tomcat_admin.port

nuxeo.server.tomcat_error.show_report

nuxeo.server.tomcat_error.show_server_info

nuxeo.server.https.port

nuxeo.server.signature

org.nuxeo.ecm.instance.name

org.nuxeo.ecm.instance.description

org.nuxeo.ecm.product.name

org.nuxeo.ecm.product.version

org.nuxeo.dev

org.nuxeo.prod

org.nuxeo.rest.exception.message.enabled

org.nuxeo.rest.stack.enable

org.nuxeo.automation.trace

org.nuxeo.automation.trace.printable

templateName.include - only available in template properties

templateName.target - only available in template properties

mail.store.protocol

mail.user

mail.store.host

mail.store.user

mail.store.password

mail.debug

nuxeo.notification.eMailSubjectPrefix

nuxeo.notification.eMailSigner

notification.check.read.permission

mail.transport.host

mail.transport.port

mail.transport.usetls

mail.transport.auth

mail.transport.user

mail.transport.password

mail.from

nuxeo.db.name

nuxeo.db.user

nuxeo.db.password

nuxeo.db.host

nuxeo.db.port

nuxeo.db.jdbc.url

nuxeo.db.validationQuery

nuxeo.db.min-pool-size

nuxeo.db.max-pool-size

nuxeo.db.idle-timeout-minutes

nuxeo.db.xaMode

nuxeo.vcs.min-pool-size

nuxeo.vcs.max-pool-size

nuxeo.vcs.blocking-timeout-millis

nuxeo.vcs.idle-timeout-minutes

nuxeo.vcs.fulltext.disabled

nuxeo.vcs.fulltext.search.disabled

nuxeo.vcs.fulltext.analyzer.language

`JAVA_HOME`

`JAVA_OPTS`

`launcher.start.max.wait`

`launcher.stop.max.wait`

`launcher.override.java.tmpdir`

`nuxeo.log.dir`

`nuxeo.pid.dir`

`nuxeo.data.dir`

`nuxeo.tmp.dir`

`nuxeo.startup.clean.tmp.dir`

`nuxeo.mp.dir`

`nuxeo.force.generation`

`nuxeo.templates`

`nuxeo.append.templates.*`

`nuxeo.bind.address`

`nuxeo.server.http.port`

`nuxeo.server.http.connectionUploadTimeout`

`nuxeo.server.ajp.enabled`

`nuxeo.server.ajp.port`

`nuxeo.server.cookies.sameSite`

`nuxeo.server.jvmRoute`

`nuxeo.server.tomcat_admin.host`

`nuxeo.server.tomcat-admin.port`

`nuxeo.server.tomcat_admin.port`

`nuxeo.server.tomcat_error.show_report`

`nuxeo.server.tomcat_error.show_server_info`

`nuxeo.server.https.port`

`nuxeo.server.signature`

`org.nuxeo.ecm.instance.name`

`org.nuxeo.ecm.instance.description`

`org.nuxeo.ecm.product.name`

`org.nuxeo.ecm.product.version`

`org.nuxeo.dev`

`org.nuxeo.prod`

`org.nuxeo.rest.exception.message.enabled`

`org.nuxeo.rest.stack.enable`

`org.nuxeo.automation.trace`

`org.nuxeo.automation.trace.printable`

`templateName.include` - only available in template properties

`templateName.target` - only available in template properties

`mail.store.protocol`

`mail.user`

`mail.store.host`

`mail.store.user`

`mail.store.password`

`mail.debug`

`nuxeo.notification.eMailSubjectPrefix`

`nuxeo.notification.eMailSigner`

`notification.check.read.permission`

`mail.transport.host`

`mail.transport.port`

`mail.transport.usetls`

`mail.transport.auth`

`mail.transport.user`

`mail.transport.password`

`mail.from`

`nuxeo.db.name`

`nuxeo.db.user`

`nuxeo.db.password`

`nuxeo.db.host`

`nuxeo.db.port`

`nuxeo.db.jdbc.url`

`nuxeo.db.validationQuery`

`nuxeo.db.min-pool-size`

`nuxeo.db.max-pool-size`

`nuxeo.db.idle-timeout-minutes`

`nuxeo.db.xaMode`

`nuxeo.vcs.min-pool-size`

`nuxeo.vcs.max-pool-size`

`nuxeo.vcs.blocking-timeout-millis`

`nuxeo.vcs.idle-timeout-minutes`

`nuxeo.vcs.fulltext.disabled`

`nuxeo.vcs.fulltext.search.disabled`

`nuxeo.vcs.fulltext.analyzer.language`

`nuxeo.vcs.noddl`

`nuxeo.vcs.ddlmode`

`nuxeo.vcs.idtype`

`nuxeo.vcs.copy.findFreeName.disabled`

`nuxeo.url`

`nuxeo.loopback.url`